The DCK266P2 18V XR Brushless Twin Kit pairs the DCD796 Compact Combi Drill with the DCF887 Impact Driver, supplied with two 5.0Ah XR batteries, a multi-voltage charger and a TOUGHSYSTEM DS150 kit box. The DCD796 uses a second-generation brushless motor with a two-speed all-metal transmission, a 15-position adjustable clutch and a hammer setting for masonry, in a compact 174mm body. The DCF887 delivers up to 205Nm of fastening torque across three speed and torque settings, with a PrecisionDrive mode for controlled starts on smaller fasteners and a three-LED halo light for shadow-free work.
Features:
- DCD796 Combi Drill: brushless motor, two-speed gearbox, 15-position clutch plus drill and hammer modes
- DCF887 Impact Driver: 205Nm torque, three speed and torque settings, PrecisionDrive mode, 1/4in hex holder
- DCD796 drills 40mm in wood, 13mm in steel and 13mm in masonry
- Ultra-compact DCD796 body (174mm) for confined spaces; three-LED ring on the DCF887 for visibility
- Both tools run on any DEWALT 18V XR battery pack
Specifications:
- DCD796: 18V XR | 27Nm soft / 70Nm hard torque | 0-550 / 0-2000 RPM | 0-9,350 / 0-34,000 BPM | 1.5-13mm keyless metal chuck
- DCD796 capacity: 40mm wood, 13mm steel, 13mm masonry | approximately 1.8kg with a 5.0Ah pack
- DCF887: 18V XR | 205Nm torque | 0-1,000 / 0-2,800 / 0-3,250 RPM | up to 3,800 IPM | 1/4in (6.35mm) hex
- Batteries: 2 x 5.0Ah XR (DCB184) with multi-voltage charger
- Includes: DCD796, DCF887, 2 x 5.0Ah batteries, charger, TOUGHSYSTEM DS150 kit box
- Brand: DeWalt